Filter
Top Products
Introduction of advanced
tuner operation
1
1 Function display
Shows the function names.
% Touch A.MENU and then touch
FUNCTION to display the function names.
The function names are displayed and oper-
able ones are highlighted.
# When A.MENU is not displayed, you can dis-
play it by touching the screen.
# You can also display MENU by clicking the
joystick.
# To return to the previous display, touch BACK.
# To return to the frequency display, touch ESC.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the frequency display.
Storing and recalling
broadcast frequencies
If you touch any of the preset tuning keys
P1P6you can easily store up to six broad-
cast frequencies for later recall with the touch
of a key.
% When you find a frequency that you
want to store in memory keep touching a
preset tuning key P 1P 6 until the preset
number stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you touch the same preset tun-
ing key P1P6the radio station frequency is
recalled from memory.
# When the touch panel keys are not displayed,
you can display them by touching the screen.
# When P1P6are not displayed, you can dis-
play them by touching DISP.
Notes
! Up to 18 FM stations, 6 for each of the three
FM bands, and 6 AM stations can be stored in
memory.
! You can also use a and b to recall radio sta-
tion frequencies assigned to preset tuning
keys P1P6.
! You can also perform the same operations
using PRESET CH MEMORY. To display
PRESET CH MEMORY, touch A.MENU and
then touch FUNCTION.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Touch A.MENU and FUNCTION and then
touch LOCAL.
2 Touch a to turn local seek tuning on.
# To turn local seek tuning off, touch b.
Tuner
En
25
Section
05
Tuner