Filter
Top Products
Appendix E – DL Commands
56 DL™ User Manual Rev 3
Syntax 4:
This command restores the factory configuration of the PDC parameters and causes the receiver to enter power-down
mode.
PDC FRESET
PROJECT
The PROJECT command defines project-related parameters and causes the insertion of a PROJECTB log, see Page 78,
into the header of the log file prior to the start of the logging session. The PROJECT command without any arguments
causes the output of a PROJECTA log. A project defined using the PROJECT command spans multiple logging sessions,
until the receipt of a PROJECT CLEAR command.
Syntax 1:
Displays the current project as a PROJECTA log.
PROJECT
[option]
Command Option Description
PROJECT - Command
option (none) Entered without arguments, this command displays the current
project as a PROJECTA log.
Examples:
project
Syntax 2:
Cancels the current project. This command does not delete project data from a file that is already open or from
previously logged files.
PROJECT CLEAR
Command Option Description
PROJECT CLEAR - Command
Example:
project clear
Syntax 3:
Defines the current project parameters.
PROJECT ADD
[project] [agency] [observer]
Command Option Description
PROJECT ADD - Command
project Project description
agency Agency description
observer Observer description
Example:
Project add demo_city company Mr_Smith