Filter
Top Products
User's manual NAVIGON 7100 | 7110
- 46 - Useful functions
► Hold frequency: Use the arrow buttons in the station section to tune
into another frequency. The system will not search for another
station if reception becomes poor.
Recalculate Route
Tap on Recalculate Route
to determine the effect new messages
concerning your route have on route calculation.
► Automatically: An alternative route avoiding the traffic obstruction
will be calculated.
► On Request: The message will be displayed. In this window, you
can determine whether or not an alternative route should be
calculated.
10.4 Logbook
You can use NAVIGON 7100 | 7110 to record a logbook. The logbook
is recorded in the "Logbook.xls
" file. You can open the file with
Microsoft Excel. Each recorded trip is added at the bottom of the table
as a new entry.
During the first recording of a trip, the "Logbook.xls
" file is created in the
"MN6 Logbook" directory on the navigation device's memory card. If
you delete or move this file, a new file will be created when you next
record a trip.
Note: Trips are recorded simultaneously in an additional file. This file is
compatible with the WISO Sparbuch 2007 program and is called
"MN6DriversLog.bin
". It can also be found in the "MN6 Logbook"
directory on the navigation devices memory card.
Note: When logbook recording is started, every movement of the
vehicle will be recorded, even when you are not navigating.
Starting a recording
1. Tap on Options
> Logbook.
2. Enter the required details.
3. Tap the Start
button.
Stopping the recording
1. Tap on Options
> Logbook.
2. Tap the Stop
button.
Note: A dialog window opens when you have reached your destination.
Specify whether you would like to end logbook recording or not.