Navigon 7110 GPS Receiver User Manual


 
User's manual NAVIGON 7100 | 7110
Working with the map - 37 -
1 The route is highlighted in orange.
2 A triangle in orange shows your current position.
If you display a planned or loaded route and the specified starting point
is not the same as your current location, then the current position may
or may not be shown on the preview.
3 The destination is marked with a little flag.
When you have planned or loaded a route and displayed it, the starting
point and each route point will be marked with a little flag.
4 You will see the total distance for the route in a small info box, together
with the estimated trip time and the estimated time of arrival.
This information can be displayed or hidden by tapping on Options
>
Settings
> Basic Settings.
If you display a route with several stages, you will see this information
for each stage.
Tap the Route Profile button to view or change the settings on
which the route calculation is based.
Tap the Start Navigation button to begin the journey.
When you display a planned or loaded route, the route may be
recalculated. Starting point for the calculation is your current
location. You will now be guided to the first route point entered.
Tap on Options > Show Turn-by-Turn List to view detailed
directions for the route. (See "Turn-by-Turn List" on page 43)
Tap the (Destination search) button to view the map in
Destination search mode. (See "Map in Destination search mode"
on page 41).