Filter
Top Products
User's manual NAVIGON 7100 | 7110
Navigation - 21 -
The COVERED COUNTRIES list closes again.
The symbol will display the country code of the destination country.
Note: Only countries of which at least a part is represented on the
currently loaded map may be selected.
5.2.2 Destination address
1. In the MAIN WINDOW, tap on New Destination > Enter an Address.
The I
NPUT SEQUENCE menu opens when you enter addresses for
the USA or Canada (and the corresponding map has been
selected).
1a Select whether you would like to enter the street first and then the
location (Street F
i
rst
), or first the location and then the street (City
First).
Note: For the following instructions, it is assumed that you have
selected City First
as the order for entering addresses.
The ADDRESS window opens.
2. Enter the name or the postal code of the destination location.
3. Enter the name of the destination street. You can also enter the
name of a well-known object, e.g. "Olympic stadium" or "Eiffel
tower".
4. Enter the house number. If you don't know the number of the
house, or you specified an object in the preceding step, then leave
the field empty.
If you don't know the house number, but know the name of a nearby
side street, then tap on the Cross Street
field and enter the name of
this street. The navigation system will calculate a route to the
intersection of the streets you have specified.
Note: It is not necessary to enter all the address details.
If you specify the town only, the navigation system will calculate a route
to the town centre.
If you specify the town and street without specifying a house number or
side street, the navigation system will calculate a route to the centre of
the street specified.
5. Tap the Start Navigation button.
The map opens in Preview mode.