Filter
Top Products
User’s manual NAVIGON 3100 | 3110
- 34 - Useful functions
The current valid traffic reports are available via the options of many
windows.
1. Tap Options
> Traffic.
The T
RAFFIC INFORMATION window opens.
Above the list, the Traffic information
button shows which kind of
traffic messaging is listed and the number of messages received.
2. Tap the Traffic information
button to select which traffic messages
should be displayed.
For each traffic message, information about the location and type of
congestion will be shown.
Tap a message to display detailed information.
The navigation system can Avoid
( ) or Ignore ( ) congestion
on the route. The Avoid / Ignore
button shows the corresponding status.
Tap the button to select the alternative setting.
Tap the
(Back) button to close the window.
9.3 TMC Settings
▶ In the TRAFFIC INFORMATION window, tap on Options >
TMC Settings
.
In the TMC
SETTINGS window you can set and configure the TMC-
sender, this will determine the effect reception of a message concerning
your route will have on it's calculation.
Tuning Mode
Tap the Tuning Mode
button to determine which sender should be set,
from which you want to receive traffic information.
▶ Automatically
: Use the arrow keys of the Station section to receive
another station. The system will search for another sender if
reception becomes poor.
▶ Hold station
: Use the arrow keys of the Station section to receive
another station. The system will search for the same sender on a
different frequency if the signal becomes poor.
▶ Hold frequency
: Use the arrow keys of the Station section to receive
another station. The system will not search for another sender if the
reception becomes poor.