Filter
Top Products
User’s manual NAVIGON 3100 | 3110
Navigation - 13 -
If another window is open, tap the (Back) button. The previous
window will open.
Tap repeatedly on the
(Back) button until the MAIN WINDOW
opens.
4.2 Specifying a new destination
New destinations for MobileNavigator are all destinations that you
have not yet navigated, or you have not yet stored.
You can enter an address here, select a special destination, or select a
destination from the quick search function.
If you are entering a new destination for the first time, the C
OVERED
COUNTRIES
list opens.
Tap on the country, in which your destination lies.
4.2.1 Specify destination country
Above the right-hand upper corner of the uppermost entry field of the
window A
DDRESS, POI IN A CITY, and POI OF NATIONAL SIGNIFICANCE, is
the Country
button. It shows the country code of the country from which
current navigation destinations can be entered.
If your destination is in a different country, then proceed as follows:
1. Tap on the Country
button.
The C
OVERED COUNTRIES list opens.
2. Tap on the country in which your destination lies.
The C
OVERED COUNTRIES list closes again.
The symbol will display the country code of the destination country.
Note: Only countries of which at least a part is represented on the
currently loaded map may be selected.
4.2.2 Address of destination
1. In the MAIN WINDOW, tap on New Destination > Enter an Address.
The
ADDRESS window opens.
2. Enter the name of the town or the postcode.
3. Enter the name of the street. You can also enter the name of a well-
known building, e.g. "Olympic stadium" or "Eiffel tower".