Filter
Top Products
User’s manual NAVIGON 13xx | 23xx
Navigation - 59 -
8 The navigation system can Detour ( ) or Ignore ( ) congestion on
the route. The button shows the active status.
► Tap on the button to select the alternative setting.
9
(Show on Map): This button is only available if at least one of the
indicated messages concerns your route. Tap on this button in order to
open the P
REVIEW TMC window. (Refer to "Preview TMC" on page 56.)
Showing a single message in detail
► Tap on a message to display this information in detail.
► Tap on the (Show on Map) button in order to view the section
concerned on the map.
TMC Settings
► In the Settings window tap on TRAFFIC INFORMATION.
In the TMC
SETTINGS window you can set the TMC traffic station and
configure whether the reception of a traffic message concerning your
route should affect your route planning and if so how.
Tuning Mode
Tap on Tuning Mode
and select a method for selecting the TMC radio
station.
► Automatic: You can use the arrow keys in the station area to select
another station. The system will search for another station if
reception becomes poor.
► Hold station: You can use the arrow keys in the station area to
select another station. The system will search for the same station
on a different frequency if the signal becomes poor.
► Hold frequency: You can use the arrow keys in the station area to
select another frequency. The system will not search for another
station if reception becomes poor.
Recalculate Route
Tap on Recalculate Route
and select how new traffic messages
concerning your route are to be used.
► Automatically: An alternative route will be calculated automatically.
The system will inform you on the recalculation.
► On Request: An announcement from the navigation device tells you
that a traffic message concerns your route. On the screen the
Traffic Information
box indicates the distance to the reported traffic
obstruction.