Navigon 21xx max GPS Receiver User Manual


 
User’s Manual NAVIGON 21xx max
Operating the NAVIGON 21xx max - 17 -
2. Follow the instructions on the screen.
5 Operating the NAVIGON 21xx max
5.1 Information
Various information icons are located at the top of many windows.
GPS
The GPS icon is visible only in the navigation application. It can indicate
the following GPS reception states:
No GPS (No symbol): The built-in GPS receiver is not operational.
Contact customer service if the problem persists.
No Signal: Data is being received from less than three satellites.
Position cannot be calculated.
GPS Ready: Data is being received from at least three satellites. The
position of the vehicle can be calculated.
For details of the GPS status refer to chapter "GPS Status, saving the
current location" on page 46.
Compass
The Compass icon is visible only in the navigation application. It shows
you in which direction you are currently moving. It can indicate the
following points of the compass: N, NE, E, SE, S, SW, W, NW.
TMC (Traffic Information)
The NAVIGON 21xx max has an integrated TMC receiver which
provides the navigation system with traffic information updates. If
necessary it can change your route dynamically, for example in order to
avoid a traffic jam.
Note: This function is only available if TMC traffic messages are being
transmitted in the country in which you are travelling. This is not the
case in all countries.
The TMC icon is visible only in the navigation application. It can indicate
the following TMC reception states:
Tuning: The TMC receiver is operational but cannot find a station that
is transmitting TMC signals. There are no active traffic messages.