Mitsubishi 4G6 Automobile Parts User Manual


 
ENGINE <6A1> -
Engine Assembly
11B-30
ENGINE ASSEMBLY
11200100558
REMOVAL AND INSTALLATION
Pre-removal Operation
D Fuel Discharge Prevention (Refer to GROUP 13A
- On-vehicle Service.)
D Under Cover Removal
D Hood Removal (Refer to GROUP 42.)
D Air Cleaner Removal
D Radiator Removal (Refer to GROUP 14.)
D Front Exhaust Pipe Removal(Refer to GROUP15.)
D Engine Cover Removal
D Battery Removal
D Engine Coolant Draining
Post-installation Operation
D Front Exhaust Pipe Installation (Refer to GROUP
15.)
D Radiator Installation (Refer to GROUP 14.)
D Air Cleaner Installation
D Hood Installation (Refer to GROUP 42.)
D Under Cover Installation
D Drive Belt Tension Adjustment (Refer to P.11B-5.)
D Accelerator Cable Adjustment (Refer to GROUP
17 - On-vehicle Service.)
D Engine Cover Installation
D Battery Installation
D Engine Coolant Supplying
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
O-ring
Engine oil
9
19
18 Nm
23
24
Removal steps
1. Accelerator cable connection
2. Capacitor connector
3. Vacuum hose connection
4. TPS connector
5. Accelerator pedal position sensor
connector <TCL>
6. ISC connector
7. Control harness connector
8. Distributor connector
9. Vacuum hose connection
10. Engine coolant temperature sensor
connector
11. Engine coolant temperature gauge
unit connector
12. Injector connector
13. Power steering oil pressure switch
connector
14. Oil pressure harness connector
15. Thermo switch connector
16. Crank angle sensor connector
17. Brake booster vacuum hose con-
nection
18. Fuel return hose connection
"
D
A
19. High-pressure fuel hose connection
20. Earth cable connection
21. Control harness connector
22. Front harness connector
23. Purge control solenoid valve
connector
24. EGR solenoid valve connector