Filter
Top Products
ENGINE <6A1> -
Camshaft and Camshaft Oil Seal
11B-18
"
C
A
CAMSHAFT SPROCKET INSTALLATION
Use the special tool to stop the camshaft sprocket from turning
in the same way as was done during removal, and then tighten
the bolts to the specified torque.
Tightening torque: 88 Nm
"
D
A
RADIATOR LOWER HOSE/RADIATOR UPPER
HOSE CONNECTION
1. Insert each hose as far as the projection of the water
inlet fitting.
2. Align the mating marks on the radiator hose and hose
clamp, and then connect the radiator hose.
Caution
Be sure to install the clamp as far as the old clamp
position.