Filter
Top Products
ENGINE <4D6> -
Engine Assembly
11C-33
ENGINE ASSEMBLY
11200100565
REMOVAL AND INSTALLATION
Pre-removal Operation
D Hood Removal (Refer to GROUP 42.)
D Air Cleaner Assembly Removal
D Engine Coolant Draining
D Radiator Assembly Removal(Refer to GROUP14.)
D Under Cover Removal
D Front Exhaust Pipe Removal(Refer to GROUP15.)
Post-installation Operation
D Front Exhaust Pipe Installation
(Refer to GROUP 15.)
D Under Cover Installation
D Radiator Assembly Installation
(Refer to GROUP 14.)
D Engine Coolant Supplying
D Accelerator Cable Adjustment
(Refer to GROUP 17 - On-vehicle Service.)
D Air Cleaner Assembly Installation
D Hood Installation (Refer to GROUP 42.)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Removal steps
1. Vacuum hose connection
2. Vacuum air temperature sensor con-
nector
3. Brake booster vacuum hose connec-
tion
4. Alternator connector
5. Oil pressure switch connector
6. Engine oil level sensor connector
7. Glow plug connector
8. Engine coolant temperature sensor
connector
9. Engine coolant temperature gauge
unit connector
10. Pump revolution sensor connector
11. Timing control valve connector
12. Solenoid-type spill valve connector
13. Fuel cut solenoid valve connector
14. Injection rate correction resistor con-
nector
15. Injection timing correction resistor con-
nector
16. Crank angle sensor connector
17. Fuel temperature sensor connector