Mitsubishi Electronics QJ72LP25-25 Automobile Electronics User Manual


 
30
Application
function
Multiple
master
system
Simplex network The multiplexed remote master function for simplex network
Duplex network The multiplexed remote master function for duplex network
Parallel master system
A system that allows the parallel remote master station and
parallel remote sub-master station to control each remote
I/O station separately. (Only the QnA corresponding
MELSECNET/10 network module supports this function.)
Since this system is not supported on the MELSECNET/H
(MELSECNET/10 mode) remote I/O station, the system
needs to be separated.
×
Constant link scan
Prevents the change of the link scan time caused by the
transient transmission function or noise, and keeps the link
scan time constant.
Number of ZNFR/ZNTO accesses setting
function
Sets the number of modules to which a remote I/O station
can execute instructions in one scan.
Function Description Availability