Filter
Top Products
29
a pool for the next hop server in the enterprise network, on page 26. In our
example, this is internal_nexthop_pool, the virtual server IP address is
10.10.10.200 with a service of 5061.
Creating a default SNAT on the inside BIG-IP LTM system
To create a default SNAT on the inside BIG-IP LTM system, follow the
procedure Creating a SNAT on the outside BIG-IP LTM system, on page 24.
Synchronizing the BIG-IP configuration
If you are using redundant BIG-IP LTM systems, the final step is to
synchronize the configuration to the redundant BIG-IP device. Refer to
Synchronizing the BIG-IP configuration if using a redundant system, on
page 15 for instructions. Synchronize the configuration of both the inside
and outside BIG-IP LTM systems.