Filter
Top Products
Deploying Microsoft Office Live Communications Server 2005 and the F5 BIG-IP LTM System v9
BIG-IP® Deployment Guide 24
Creating the virtual server on the outside BIG-IP LTM system
After you define the pool, the next step is to define the following virtual
server on the BIG-IP devices to load balance the traffic to the Access Proxy
pool.
To create the virtual server for the Access Proxy pool on
the outside BIG-IP device
1. On the Main tab, expand Local Traffic, and then click Virtual
Servers.
The Virtual Servers screen opens.
2. In the upper right portion of the screen, click the Create button.
The New Virtual Server screen opens.
3. In the Name box, type a name for this virtual server. In our
example, we type ap_outside.
4. In the Destination section, select the Host option button.
5. In the Address box, type the IP address of this virtual server. In our
example, we use 172.168.10.100.
6. In the Service Port box, type 5061.
7. From the Configuration list, select Advanced.
8. From the Protocol Profile (Client) list, select the name of the
profile you created in the Creating the TCP profile section. In our
example, we select ap_tcp.
9. In the Resources section, from the Default Pool list, select the name
of the pool you created in the Creating a pool for the Access Proxy
devices on the outside BIG-IP LTM system section.
In our example, we select ap_pool_outside.
10. Click the Finished button.
Creating a SNAT on the outside BIG-IP LTM system
The next step is to configure a SNAT.
To create a SNAT
1. On the Main tab, expand Local Traffic, and then click SNATs.
The SNATs screen opens.
2. In the upper right portion of the screen, click the Create button.
The New SNAT screen opens.
3. In the Name box, type a name for this SNAT.
In our example, we type ap_defaultSNAT.
4. In the Translation box, select Automap.
5. Click the Finished button.