Mercedes-Benz 2010 E-Class Coupe Automobile User Manual


 
Engine E 550
No. of cylinders
8
Bore
3.86 in (98.00 mm)
Stroke
3.56 in (90.50 mm)
Total piston
displacement
333.2 cu in
(5 461 cm
3
)
Compression
ratio
10.7:1
Output acc. to
SAE J 1349
16
382 hp/6 000 rpm
(285 kW/6 000 rpm)
Maximum torque
acc. to SAE J 1349
391 lb-ft/
2 800 - 4 800 rpm
(530 Nm/
2 800 - 4 800 rpm)
Maximum engine
speed
6 500 rpm
Firing order
1-5-4-2-6-3-7-8
Poly-V-belt
2 401 mm
Electrical system E 550
Alternator
14 V/180 A
Starter motor
12 V/1.7 kW
Battery
12 V/80 Ah
Spark plugs, type
NGK PLKR 7A
Spark plugs,
electrode gap
0.031 in (0.8 mm)
Spark plugs,
tightening torque
15 - 18 lb-ft
(20 - 25 Nm)
Main dimensions E 550
Overall vehicle
length
185.0 in (4 698 mm)
Overall vehicle
width
17
79.8 in (2 028 mm)
Overall vehicle
height
54.8 in (1 393 mm)
Wheelbase
108.7 in (2 760 mm)
Track, front
60.6 in (1 538 mm)
Track, rear
60.8 in (1 544 mm)
Ground clearance
3.7 in (95 mm)
Turning circle
36.1 ft (11.0 m)
Weights E 550
Roof load
max. 220 lb (100 kg)
Trunk load
max. 220 lb (100 kg)
Rims and tires
Notes
!
Only use tires which have been tested and
approved by Mercedes-Benz. Tires
approved by Mercedes-Benz are developed
to provide best possible performance in
conjunction with the driving safety systems
on your vehicle such as the ABS or the ESC.
Tires specially developed for your vehicle
and tested and approved by Mercedes-
Benz can be identified by finding the
following on the tire’s sidewall:
R
MO = Mercedes-Benz Original
equipment tires
Using tires other than those approved by
Mercedes-Benz may result in damage that
is not covered by the Mercedes-Benz
Limited Warranty.
16
Premium fuel required. Performance may vary with fuel octane rating.
17
Exterior rear view mirrors folded out.
Rims and tires
297
Technical data
207_AKB; 2; 35, en-US
d2ureepe, Version: 2.11.8.1
2009-07-17T07:10:21+02:00 - Seite 297
Z