Mercedes-Benz 2010 E-Class Coupe Automobile User Manual


 
Display messages Possible causes/consequences and M Solutions
$
(USA only)
J
(Canada
only)
EBD, ABS,
and ESC
Inoperativ
e See
Operator's
Manual
In addition, the yellow ESC warning lamp ä, the yellow
ESC OFF warning lamp å, and the yellow ABS indicator
lamp ! come on.
The brake system is still functioning normally but due to a
malfunction, the ABS, the BAS, the BAS PLUS, the EBP, the
ESC, the HOLD function, the PRE-SAFE
®
system, and the PRE-
SAFE
®
Brake are unavailable.
The ATTENTION ASSIST is disabled.
X
Continue driving with added caution. Wheels may lock
during hard braking, reducing steering capability.
X
Adjust driving to be consistent with reduced braking
responsiveness.
X
Have the system checked at an authorized Mercedes-Benz
Center as soon as possible.
Failure to follow these instructions increases the risk of an
accident.
$
(USA only)
J
(Canada
only)
Brake
Immediatel
y
A malfunction has occurred while the HOLD function or
DISTRONIC PLUS was switched on.
The engine cannot be started.
X
While observing surrounding traffic conditions and when it
is safe, immediately depress the brake pedal firmly until the
warning message disappears.
X
Secure vehicle from rolling away before getting out of it
(Y page 102).
The engine can be started again.
$
(USA only)
!
(Canada
only)
Release
Parking
Brake
You are driving with the parking brake engaged. In addition
an acoustic warning sounds.
X
Release the parking brake.
$
(USA only)
J
(Canada
only)
Check
Brake
Fluid
Level
There is insufficient brake fluid in the reservoir.
Risk of accident!
X
Stop the vehicle in a safe location or as soon as it is safe
to do so.
X
Engage the parking brake.
X
Do not drive any further.
X
Contact an authorized Mercedes-Benz Center or call
Roadside Assistance.
Do not add brake fluid! This will not solve the problem.
246
Vehicle status messages in the multifunction display
Practical hints
207_AKB; 2; 35, en-US
d2ureepe, Version: 2.11.8.1
2009-07-17T07:10:21+02:00 - Seite 246