Filter
Top Products
Display messages Possible causes/consequences and M Solutions
+
Key Not
Detected
(message
appears in
red)
The SmartKey with KEYLESS-GO is not detected while the
engine is running because there is strong radio-frequency
interference.
X
Stop the vehicle as soon as it is safe to do so.
X
Engage the parking brake.
X
Remove the KEYLESS-GO button from the starter switch
(Y page 79).
X
Operate the vehicle with the SmartKey in the starter switch.
+
Key Not
Detected
(message
appears in
white)
The SmartKey with KEYLESS-GO is momentarily not detected.
X
Change the position of the SmartKey in the vehicle.
X
If necessary, remove the KEYLESS-GO button from the
starter switch (Y page 79).
+
Remove
'Start'
Button
and
Insert Key
The KEYLESS-GO system is malfunctioning.
X
Remove the KEYLESS-GO button from the starter switch
(Y page 79).
X
Operate the vehicle with the SmartKey in the starter switch.
¥
Check
Washer
Fluid
The washer fluid in the washer fluid reservoir has fallen below
the minimum level.
X
Add washer fluid (Y page 191).
D
Power
Steering
Malfunctio
n
See
Operator's
Manual
Power assistance for the steering system is not available. A
considerably higher degree of effort is necessary to steer the
vehicle.
X
Check whether you are capable to apply the higher degree
of effort necessary to safely steer the vehicle.
If you are able to steer the vehicle safely:
X
Continue driving with added caution.
X
Have the system checked at an authorized Mercedes-Benz
Center.
If, in any way, you feel that you are not able to steer the vehicle
safely:
X
Stop the vehicle in a safe location as soon as it is safe to
do so.
X
Apply the parking brake.
X
Do not continue to drive.
X
Contact an authorized Mercedes-Benz Center.
Vehicle status messages in the multifunction display
251
Practical hints
207_AKB; 2; 35, en-US
d2ureepe, Version: 2.11.8.1
2009-07-17T07:10:21+02:00 - Seite 251
Z