Filter
Top Products
R
the position of the accelerator pedal
R
the vehicle speed
With drive position D selected, you can
influence transmission shifting by
R
limiting the gear range
R
extending the gear range
R
changing the gears manually (vehicles with
dynamic handling package)
Transmission positions
The current transmission position appears in
the multifunction display.
:
Transmission position indicator
If the current transmission position does not
appear in the multifunction display due to a
malfunction, for example, make sure that the
automatic transmission is in the desired
position.
X
Shift the automatic transmission into drive
position D.
X
Do not limit the gear range.
X
Drive off carefully.
Effect
B
Park position
Shift the automatic transmission
into park position P only when the
vehicle is stopped. The park
position is not intended to serve as
a brake when the vehicle is parked.
Rather, the driver should always
engage the parking brake in
addition to shifting the automatic
transmission into park position P to
secure the vehicle.
The SmartKey can only be removed
from the starter switch with the
gear selector lever in park position
P. With the SmartKey removed from
the starter switch, the gear selector
lever is locked in park position P.
If the vehicle’s electrical system is
malfunctioning, the gear selector
lever could remain locked in park
position P. To unlock the gear
selector lever manually, see
“Manually unlocking the gear
selector lever” (Y page 272).
X
Have the vehicle’s electrical
system checked at an authorized
Mercedes-Benz Center as soon
as possible.
C
Reverse gear
Shift the automatic transmission
into reverse gear R only when the
vehicle is stopped.
Automatic transmission
105
Controls in detail
207_AKB; 2; 35, en-US
d2ureepe, Version: 2.11.8.1
2009-07-17T07:10:21+02:00 - Seite 105
Z