Filter
Top Products
X
Driver’s side only: Release the washer fluid
reservoir (Y page 277).
X
Turn housing cover : counterclockwise
and remove it.
X
Turn bulb socket ; counterclockwise and
pull it out.
X
Pull the bulb out of bulb socket ;.
X
Insert the new bulb into bulb socket ;.
X
Insert bulb socket ; into the housing and
turn it clockwise.
X
Align housing cover : and turn it
clockwise.
X
Driver’s side only: Fix the washer fluid
reservoir (Y page 277).
Parking and standing lamp bulb
(halogen headlamps only)
X
Driver’s side only: Release the washer fluid
reservoir (Y page 277).
X
Turn housing cover : counterclockwise
and remove it.
X
Pull out bulb socket ;.
X
Pull the bulb out of bulb socket ;.
X
Insert the new bulb into bulb socket ;.
X
Insert bulb socket ;.
X
Align housing cover : and turn it
clockwise.
X
Driver’s side only: Fix the washer fluid
reservoir (Y page 277).
Front turn signal lamp bulb (halogen
headlamps only)
X
Driver’s side only: Release the washer fluid
reservoir (Y page 277).
X
Turn bulb socket : counterclockwise and
pull it out.
X
Turn the bulb counterclockwise with light
pressure and pull it out of bulb socket :.
X
Insert the new bulb into bulb socket : and
turn the bulb clockwise.
X
Insert bulb socket : into the housing and
turn it clockwise.
X
Driver’s side only: Fix the washer fluid
reservoir (Y page 277).
Replacing wiper blades
Safety notes
G
Warning!
For safety reasons, switch off the wipers and
remove the SmartKey from the starter switch
(vehicles with KEYLESS-GO: Make sure the
vehicle’s on-board electronics have status 0)
before replacing a wiper blade. Otherwise, the
wiper motor could suddenly turn on and cause
injury.
G
Warning!
Wiper blades are components that are subject
to wear and tear. Replace the wiper blades
twice a year, preferably in the spring and fall.
Otherwise the windshield will not be wiped
278
Replacing wiper blades
Practical hints
207_AKB; 2; 35, en-US
d2ureepe, Version: 2.11.8.1
2009-07-17T07:10:21+02:00 - Seite 278