Filter
Top Products
Replacing bulbs
314
Parking and standing lamp bulb
X
Turn housing cover 1 counterclockwise
and remove it.
X
Pull out bulb socket 2.
X
Pull the bulb out of bulb socket 2.
X
Press the new bulb gently into bulb socket
2.
X
Place bulb socket 2 back into the housing.
X
Align housing cover 1 and turn it clock-
wise until it engages.
Corner-illuminating lamp bulbs
X
Turn housing cover 1 counterclockwise
and remove it.
X
Turn bulb socket 5 counterclockwise and
remove it.
X
Pull the bulb out of bulb socket 5.
X
Press the new bulb gently into bulb socket
5.
X
Insert bulb socket 5 into the guide in the
headlamp.
X
Turn bulb socket 5 clockwise until it
engages.
The handle of the bulb socket must be ver-
tical.
X
Align housing cover 1 and turn it clock-
wise until it engages.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
X
Switch off the ignition.
X
Turn the exterior lamp switch to position
M.
X
Open the trunk.
Tail lamp unit
Opening the driver’s side trim panel
1
Lock
2
Cover
X
Turn lock 1 counterclockwise by 90°.
X
Remove cover 2.
Practical hints