Filter
Top Products
Control system
137
The following functions are available:
R
Selecting speedometer display mode
(Y page 137)
R
Selecting language (Y page 137)
R
Setting standard display (Y page 137)
Selecting speedometer display mode
X
Move the selection marker with button
æ or ç to the Instr. Cluster sub-
menu.
X
Press button j or k repeatedly until
the message Digital Speedometer
appears in the multifunction display.
The selection marker is on the current set-
ting.
X
Press button æ or ç to set speed-
ometer unit to Kilometers or Miles.
Selecting language
X
Move the selection marker with button
æ or ç to the Instr. Cluster sub-
menu.
X
Press button j or k repeatedly until
the message Language appears in the mul-
tifunction display.
The selection marker is on the current set-
ting.
X
Press button æ or ç to select the
language to be used for the multifunction
display messages.
Setting standard display
X
Move the selection marker with button
æ or ç to the Instr. Cluster sub-
menu.
X
Press button j or k repeatedly until
the message Select Display appears in
the multifunction display.
The selection marker is on the current set-
ting.
X
Press button æ or ç to select the
desired setting.
The selected display appears in the left
multifunction display.
The other display now appears in the right
multifunction display when scrolling
through the Standard display menu
(Y page 129).
Controls in detail
Z