Filter
Top Products
Latch plate C is free-sliding across the
seat belt.
i
To release buckle ; from fixed latch
plate ?, press release button = using a
suitable object, e.g. a screwdriver or a coin.
X
With a smooth motion, pull the seat belt out
of attachment :.
X
Push fixed latch plate ? into buckle ;
until it clicks.
X
Guide the seat belt at free-sliding latch
plate C across your body.
Place the shoulder portion of the seat belt
across the top of your shoulder and the lap
portion across your hips.
X
Push free-sliding latch plate C into buckle
A until it clicks.
X
If necessary, tighten the lap portion to a
snug fit by pulling shoulder portion up.
Seat belt outlet height adjustment
You can adjust the height of the seat belt
outlet for the following seats:
R
Driver’s seat
R
Front passenger seat
R
Rear outer seats
X
Raising: Slide the seat belt outlet height
adjuster upward.
The seat belt outlet height adjuster
engages in different positions.
X
Lowering: Press and hold release
button :.
X
Slide the seat belt outlet height adjuster
downward.
X
Release button : and make sure the seat
belt outlet height adjuster engages into
place.
42
Occupant safety
Safety and security
463_AKB; 2; 52, en-US
d2ureepe, Version: 2.11.7.1
2008-12-02T10:52:11+01:00 - Seite 42