Filter
Top Products
i
Do not overtighten securing screws :.
Otherwise tail lamp lens ; could be
damaged.
X
G 55 AMG only: Reinstall rear lamp
guard : (Y page 230).
Rear fog lamp/Backup lamp
The following description applies to both, the
rear fog lamp and the backup lamp.
Example illustration: Rear fog lamp
X
Loosen and remove securing screws :.
X
Remove lamp lens ;.
X
Gently press onto bulb = and turn
counterclockwise out of its bulb socket.
X
Gently press the new bulb into the bulb
socket and turn clockwise until it engages.
X
Reinstall lamp lens ;.
X
Install and tighten securing screws :.
i
Do not overtighten securing screws :.
Otherwise lamp lens ; could be damaged.
License plate lamps
X
Loosen and remove securing screws :.
X
Remove license plate lamp lens ;.
X
Replace tubular bulb =.
X
Reinstall license plate lamp lens ;.
X
Install and tighten securing screws :.
i
Do not overtighten securing screws :.
Otherwise license plate lamp lens ; could
be damaged.
Replacing wiper blades
Safety notes
G
Warning!
For safety reasons, switch off wipers and
remove SmartKey from starter switch before
replacing a wiper blade. Otherwise, the wiper
motor could suddenly turn on and cause
injury.
Replacing wiper blades
231
Practical hints
463_AKB; 2; 52, en-US
d2ureepe, Version: 2.11.7.1
2008-12-02T10:52:11+01:00 - Seite 231
Z