Filter
Top Products
Selecting speedometer display mode
X
Press button V or U repeatedly until
the Settings menu appears in the
multifunction display.
X
Press button &.
X
Move the selection marker with button
W or X to the Inst. Cluster
submenu.
X
Press button & or * repeatedly until
the message Disp.Unit Speed-/Odom.
appears in the multifunction display.
The selection marker is on the current
setting.
X
Press button W or X to set
speedometer unit to Km or Miles.
Selecting language
X
Press button V or U repeatedly until
the Settings menu appears in the
multifunction display.
X
Press button &.
X
Move the selection marker with button
W or X to the Inst. Cluster
submenu.
X
Press button & or * repeatedly until
the message Language appears in the
multifunction display.
The selection marker is on the current
setting.
X
Press button W or X to select the
language to be used for the multifunction
display messages.
Selecting display (digital speedometer or
outside temperature) for status indicator
X
Press button V or U repeatedly until
the Settings menu appears in the
multifunction display.
X
Press button &.
X
Move the selection marker with button
W or X to the Instr. Cluster
submenu.
X
Press button & or * repeatedly until
the message Status Line Display
appears in the multifunction display.
The selection marker is on the current
setting.
X
Press button W or X to select the
desired setting.
The selected display is then shown
continuously in the status indicator (lower
display).
Control system
105
Controls in detail
463_AKB; 2; 52, en-US
d2ureepe, Version: 2.11.7.1
2008-12-02T10:52:11+01:00 - Seite 105
Z