Filter
Top Products
X
Loosen and remove securing screws :.
X
Remove turn signal lens ;.
X
Press bulb = gently into the socket, turn
counterclockwise and remove it.
X
Press the new bulb gently into the socket
and turn clockwise until it engages.
X
Reinstall turn signal lens ;.
X
Install and tighten securing screws :.
i
Do not overtighten securing screws :.
Otherwise turn signal lens ; could be
damaged.
X
G 55 AMG only: Remount the turn signal
guard.
Side marker lamp bulb
The following description applies to both, the
front and the rear side marker lamps.
Example illustration: Front side marker
X
Loosen and remove securing screws :.
X
Remove side marker lamp housing ;.
X
Remove dust cover =.
X
Press catch aside and pull out the bulb
socket with the bulb from side marker lamp
housing ;.
X
Gently press onto bulb ? and turn
counterclockwise out of its bulb socket.
X
Gently press the new bulb into the bulb
socket and turn clockwise until it engages.
Replacing bulbs
229
Practical hints
463_AKB; 2; 52, en-US
d2ureepe, Version: 2.11.7.1
2008-12-02T10:52:11+01:00 - Seite 229
Z