Filter
Top Products
Jack
G
Warning!
Only use the jack supplied with your vehicle
to lift the vehicle briefly for wheel changes. If
you use the jack for any other purpose, you or
others could be injured, as the jack is
designed only for the purpose of changing a
wheel.
When using the jack, observe the safety notes
in the “Mounting the spare wheel” section and
the notes on the jack.
X
Take the pump handle (three pieces) and
jack from the vehicle tool kit
(Y page 194).
Pump handle
X
Assemble the pump handle.
Jack
X
Set indent : of the pump handle onto
release bolt ; of the jack.
X
Using the pump handle, turn release
bolt ; clockwise until its stop.
Release bolt ; is closed.
X
Remove the pump handle from release
bolt ;.
X
Set the pump handle into the pump lever
as indicated by the arrow.
Before placing the pump handle and the jack
back into the vehicle tool kit:
X
Press the jack piston in again and close the
release bolt by using the pump handle.
X
Disassemble the pump handle.
Spare wheel
G
Observe Safety notes, see page 232.
The spare wheel is located under a cover on
the outside of the vehicle’s tailgate.
X
Removing: Take the screwdriver from the
vehicle tool kit (Y page 194).
X
Open lock : using the screwdriver.
i
You can also use a coin to open the lock.
X
Fold tab ; downwards.
Where will I find ...?
195
Practical hints
463_AKB; 2; 52, en-US
d2ureepe, Version: 2.11.7.1
2008-12-02T10:52:11+01:00 - Seite 195
Z