Filter
Top Products
recommended to have such work done by a
qualified technician.
Front fog lamp bulb
Example illustration: Right front fog lamp (left front
fog lamp laterally reversed)
X
Loosen and remove securing screws :.
X
Remove front fog lamp trim panel ; in
direction of arrow and the seal.
X
Loosen and remove front fog lamp-
securing screws =.
i
Do not turn adjusting screw ?. If
adjusting screw ? is turned, the front fog
lamp adjustment must be checked at a
Mercedes-Benz Center.
X
Remove front fog lamp A.
X
Hold front fog lamp A, gently push onto
bulb socket B, and turn bulb socket B
counterclockwise to its stop.
X
Pull bulb socket B out of front fog lamp
A.
X
Pull bulb C out of its bulb socket.
X
Insert the new bulb into the bulb socket
B.
X
Hold front fog lamp A, insert bulb socket
B into front fog lamp A, and turn bulb
socket B clockwise to its stop.
X
Insert front fog lamp A and install and
tighten front fog lamp-securing screws =.
X
Install front fog lamp trim panel ; and the
seal.
X
Install and tighten securing screws :.
Front turn signal lamp bulb
X
G 55 AMG only: Disengage the turn signal
guard from the clip in the rear and fold it
forward. Make sure the turn signal guard
does not strike painted surfaces.
228
Replacing bulbs
Practical hints
463_AKB; 2; 52, en-US
d2ureepe, Version: 2.11.7.1
2008-12-02T10:52:11+01:00 - Seite 228