Filter
Top Products
485
Practical hints
Replacing bulbs
Low beam and high beam flasher spot
bulbs
Front turn signal lamp bulbs
̈ Pull bulb socket 1 out of the head-
lamp housing.
̈ Pull the turn signal bulb out of bulb
socket 1.
̈ Insert the new turn signal bulb into bulb
socket 1.
̈ Insert bulb socket 1 into the head-
lamp housing.
Parking and standing lamp bulbs
1 Bulb socket for parking and standing
lamp
̈ Turn bulb socket 1 counterclockwise.
̈ Pull bulb socket 1 out of the housing.
̈ Pull the bulb out of bulb socket 1.
̈ Insert the new parking and standing
lamp bulb into bulb socket 1.
̈ Insert bulb socket 1 into the housing.
̈ Turn bulb socket 1 clockwise until it
engages.
Front fog lamp bulbs
1 Front fog lamp
2 Cover
3 Retaining screws
̈ Remove retaining screws 3.
̈ Take off cover 2.
Warning! G
Do not remove the low beam/high beam
cover for the Bi-Xenon* headlamp. Because
of high voltage in Bi-Xenon* lamps, it is dan-
gerous to replace the bulb or repair the lamp
and its components. We recommend that
you have such work done by a qualified
technician.
i
The following procedure also applies to
corner-illuminating front fog lamps*.
୴୴