Filter
Top Products
167
Controls in detail
Control system
Operating the CD player
Selecting CD track
̈ Turn on the COMAND system and
select CD. Refer to separate COMAND
system operating instructions.
̈ Press button è or ÿ repeatedly
until the settings for the CD currently
being played appear in the multifunc-
tion display.
1 Current CD (for CD changer*)
2 Current track
̈ Press button k or j repeatedly
until the desired track is selected.
Selecting MP3-CD track
̈ Turn on the COMAND system and
select MP3. Refer to separate
COMAND system operating
instructions.
̈ Press button è or ÿ repeatedly
until the settings for the MP3-CD cur-
rently being played appear in the multi-
function display.
1 MP3 mode
2 Current track
̈ Press button k or j repeatedly
until the desired track is selected.
NAV menu*
The
NAV
menu contains the functions
needed to operate your navigation system.
̈ Press button è or ÿ repeatedly
until the message
NAV
appears in the
multifunction display.
The message shown in the multifunction
display depends on the status of the navi-
gation system:
ț With the COMAND system switched
off, the message
NAV off
appears in
the multifunction display.
ț With the COMAND system switched on
but route guidance not activated, the
direction of travel and, if applicable, the
name of the street currently traveled
on appear in the multifunction display.
i
Vehicles with CD changer*: To select a CD
from the magazine, press a number on the
COMAND system key pad located in the center
console.