Filter
Top Products
230
Controls in detail
3-zone automatic climate control*
̈ Press button to decrease or
button Q to increase the air volume
(
୴ page 224) to the desired level.
The air volume decreases/increases to
the next lower/higher blower speed
and heating switches to the tempera-
ture that was set before the front de-
froster was switched on.
The indicator lamp on button |
goes out. The indicator lamp on
button 9 comes on.
or
̈ Turn temperature
control 1 and/or 9 (
୴ page 224)
slightly in any direction.
Heating switches to the temperature
that was set before the front defroster
was switched on.
The indicator lamp on button |
goes out. The indicator lamp on
button 9 comes on.
Deactivating
̈ Press button | (୴ page 224).
The indicator lamp on the button goes
out. Defrosting is turned off.
The previous settings are once again in
effect.
Windshield fogged on the outside
̈ Switch the windshield wipers on
(
୴ page 59).
̈ Press button U (୴ page 224).
The indicator lamp on button U
goes out. Air volume and air
distribution are controlled separately
for each zone.
If the automatic air distribution and air
volume are switched off:
̈ Press buttons 8 and Y
(
୴ page 224).
i
The air conditioning compressor remains on
even if the indicator lamp in button | goes
out. This helps to prevent the windshield from
fogging.
i
To switch off, you can also press
button ´ or U (
୴ page 224).
i
Keep this setting selected only until the
windshield is clear again.