Filter
Top Products
256
Controls in detail
Panorama roof with power tilt/sliding panel*
̈ Reinsert the fuse in the fuse box.
̈ Switch on the ignition (୴ page 39).
̈ Push and hold the roof panel switch in
direction of arrow 2 (
୴ page 254)
until the roller sunblinds are fully
closed.
̈ Keep holding the roof panel switch in
direction of arrow 2 (
୴ page 254) for
approximately 1 second.
̈ Pull and hold the roof panel switch in
direction of arrow 1 (
୴ page 254)
until the roller sunblinds are fully
opened.
̈ Keep holding the roof panel switch in
direction of arrow 1 (
୴ page 254) for
approximately 1 second.
̈ Press and hold the roof panel switch in
direction of arrow 3 (
୴ page 254)
until the tilt/sliding panel is fully raised
at the rear.
̈ Push and hold the roof panel switch in
direction of arrow 2 (
୴ page 254)
until the tilt/sliding panel is fully
closed.
̈ Keep holding the roof panel switch in
direction of arrow 2 (
୴ page 254) for
approximately 1 second.
̈ Open the tilt/sliding panel using the
Express-open feature (
୴ page 255).
If the tilt/sliding panel opens
completely, the roof is synchronized.
If the tilt/sliding sunroof does not open
completely:
̈ Repeat the above steps.
୴୴