Filter
Top Products
254
Controls in detail
Panorama roof with power tilt/sliding panel*
The tilt/sliding panel is opened and closed
electrically. The switch for the tilt/sliding
panel is on the overhead control panel.
The tilt/sliding panel only operates with
the roller sunblinds opened.
Roof panel switch
1 Push back to slide roof panel open
2 Push forward to slide roof panel closed
3 Push up to raise roof panel
4 Pull down to lower roof panel
Opening
̈ Pull and hold the roof panel switch to
resistance point in direction of
arrow 1 (
୴ page 254).
Release the roof panel switch when the
tilt/sliding panel has reached the
desired position.
Closing
̈ Press and hold the roof panel switch in
direction of arrow 2 (
୴ page 254).
Release the roof panel switch when the
tilt/sliding panel has reached the
desired position.
Raising
You can raise the tilt/sliding panel at the
rear for better ventilation of the vehicle
interior.
̈ Press and hold the roof panel switch in
direction of arrow 3 (
୴ page 254).
Release the roof panel switch when the
tilt/sliding panel has reached the
desired position.
Lowering
̈ Pull and hold the roof panel switch in
direction of arrow 4 (
୴ page 254)
until the tilt/sliding panel has lowered
and closed completely.