Filter
Top Products
249
Controls in detail
Power tilt/sliding sunroof*
The tilt/sliding sunroof is opened and
closed electrically. The switch for the
tilt/sliding sunroof is located on the
overhead control panel.
Sunroof switch
1 Push back to slide sunroof open
2 Push forward to slide sunroof closed
3 Push up to raise sunroof at rear
4 Pull down to lower sunroof at rear
With the sunroof closed or tilted open, a
screen can be slid into the roof opening to
guard against sun rays. When sliding the
sunroof open, the screen will also retract.
̈ Switch on the ignition (୴ page 39).
Opening and closing
̈ To open, close, raise, or lower the
tilt/sliding sunroof, move the sunroof
switch to the resistance point in the
required direction of arrows 1 to 4
(
୴ page 249).
̈ Release the sunroof switch when the
tilt/sliding sunroof has reached the
desired position.
i
You can also open or close the tilt/sliding
sunroof using the SmartKey or the
KEYLESS-GO* function, see “Summer opening
feature” (
୴ page 244) and “Convenience clos-
ing feature” (
୴ page 245). Depending on the
current position, the tilt/sliding sunroofs may
also open or close when the air recirculation
button : on the control panel of the climate
control (
୴ page 210) or automatic climate
control* (
୴ page 224) is pressed and held.