Filter
Top Products
442
Practical hints
What to do if …
Display message Possible cause/consequence Possible solution
Check tires
,
then restart
Run Flat Indicator.
There was a warning message about
a loss in the tire inflation pressure
and the Run Flat Indicator has not
been reactivated yet.
̈ Make sure that the correct tire inflation pressure is set
for each tire.
̈ Then restart the Run Flat Indicator (୴ page 375).
Run Flat Indicator
Inoperative
Run Flat Indicator is malfunctioning. ̈ Have the Run Flat Indicator checked by an authorized
Mercedes-Benz Light Truck Center.
Tire Pressure
Check Tires
The Run Flat Indicator indicates that
the pressure is too low in one or more
tires.
̈ Carefully bring the vehicle to a halt, avoiding abrupt
steering and braking maneuvers. Observe the traffic
situation around you.
̈ Check and adjust tire inflation pressure as required
(
୴ page 373).
̈ If necessary, replace the wheel (୴ page 492).
̈ Restart the Run Flat Indicator after adjusting the tire
inflation pressure values (
୴ page 375).
Tire pressure
displayed after
driving for
a few minutes
.
Vehicles with Advanced TPMS*:
The tire inflation pressure is being
checked.
̈ Drive the vehicle for a few minutes.