Filter
Top Products
279
Controls in detail
Panorama roof with power tilt/sliding panel*
Tilt/sliding panel and roller sunblind
̈ Switch on the ignition.
1 Push up to raise at the rear
2 Push back to open
3 Pull down to close
̈ Move and hold the roof panel switch in
direction of arrow 3 until the roller
sunblinds are fully retracted.
̈ Keep holding the roof panel switch in
direction of arrow 3 for approximately
1 second.
̈ Move and hold the roof panel switch in
direction of arrow 2 until the roller
sunblinds are fully extended.
̈ Move and hold the roof panel switch in
direction of arrow 2 until the tilt/slid-
ing panel is opened approximately
4 inch (10 cm).
̈ Move and hold the roof panel switch in
direction of arrow 3 until the tilt/slid-
ing panel is fully closed.
̈ Keep holding the roof panel switch in
direction of arrow 3 for approximately
1 second.
̈ Check the Express-open feature of the
tilt/sliding panel (
୴ page 278).
If the tilt/sliding panel opens com-
pletely, the roof is synchronized. Other-
wise repeat the above steps.