Filter
Top Products
226
Controls in detail
Audio system
Activating Bluetooth
®
̈ Switch on the telephone
(see telephone operating instructions).
̈ Enter the PIN (not necessary at each
telephone or network).
̈ Activate Bluetooth
®
connection on the
telephone (see telephone operating in-
structions)
̈ Press button h on the audio control
unit to call up the telephone mode.
̈ Activate Bluetooth
®
connection on the
audio system (
୴ page 193).
̈ ê Ǟ
System
Ǟ
Activate Blue-
tooth
.
You have activated or deactivated
Bluetooth
®
. A checkmark appears
when Bluetooth
®
is activated.
Registering a telephone (authorizing)
When you use your telephone in conjunc-
tion with the audio system for the first
time, you must register (authorize) it.
It is possible to register several tele-
phones. The connection is always estab-
lished to the last activated telephone in
signal range. When you authorize a new
telephone, it is activated automatically.
You can switch between the authorized
telephones.
Searching for a telephone
̈ h Ǟ
Tel
Ǟ
Phone List
Ǟ
Update
.
The audio system searches for suitable
Bluetooth
®
telephones within range
and enters them in the telephone list.
Authorized Bluetooth
®
telephones will
be identified by a telephone-symbol in
front of the list entry once the tele-
phone list has been updated. (The sym-
bol will be grayed out if the authorized
phone is not located in the Bluetooth
®
range.)
i
On certain telephones, not only do you have
to activate the Bluetooth
®
function but your own
device must additionally be made “visible” for
other devices.
Each Bluetooth
®
device has a Bluetooth
®
device
name. It is recommended to give your telephone
a personal name, by which you can clearly recog-
nize your telephone.
i
If the Bluetooth
®
function on the audio sys-
tem is disabled, the message
Bluetooth not
activated in system settings
appears.
i
The duration of the search procedure de-
pends on the number and type of Bluetooth
®
telephones. The search may take a few minutes.
i
If the telephone list is already full (15 en-
tries), you must de-authorize one of the autho-
rized devices. Then you will start the search
again. Otherwise a new device you are looking
for will not appear in the list.
If the audio system does not find your phone, ex-
ternal authorization may be necessary
(
୴ page 228).