Filter
Top Products
197
Controls in detail
Audio system
Selecting a station/channel
You have the following selection options:
ț The station search function
ț The channel list
(Weather Band)
ț Station memory
(except Weather Band)
ț The manual frequency entry
(except Weather Band)
The station search proceeds in the
following frequency increments:
ț 200 kHz in FM range
ț 10 kHz in AM range
Tuning to a station/channel via
station/channel search function
̈ Press button b on audio control
unit repeatedly until the FM/AM/WB
waveband is selected.
̈ Slide omp or rotate ymz when the
main area in the basic menu is active.
Depending on the direction in which
the controller is being slid or rotated,
the system searches upward or down-
ward and stops at the next receivable
station/channel.
or
̈ Press button G or H on audio
control unit.
Depending on the pressed button, the
system searches upward or downward
and stops at the next receivable
station/channel.
Selecting a station using station
memory
̈ Press b button on audio control
unit repeatedly until desired waveband
has been selected.
̈ Select
Presets
.
or
̈ Press n when the main area is
selected.
The memory menu appears. The dot R
in front of a memory position indicates
that the currently selected station is
saved there.
̈ Select station in memory by rotating
ymz or sliding qmr and press n.
or
̈ Press desired station button 1 to
R, with the keypad in audio control
unit briefly.
i
The search function searches for the next
receivable station in the FM or AM waveband.
In Weather Band (WB) the search function
switches to the next channel in the channel list.
For tuning to a station/channel you can also use
the buttons on the multifunction steering wheel
(
୴ page 159).
i
This function is not available for Weather
Band.