Filter
Top Products
276
Controls in detail
Panorama roof with power tilt/sliding panel*
Roller sunblinds
The roller sunblinds are designed to pro-
tect you from excessive sunlight streaming
in through the panorama roof with power
tilt/sliding panel.
The front roller sunblind only operates with
the tilt/sliding panel closed. The front and
rear roller sunblind cannot be operated in-
dividually.
̈ Switch on the ignition.
Operating roller sunblinds
Roof panel switch
1 Extend front roller sunblinds
2 Extend front roller sunblinds
3 Retract front roller sunblinds
̈ Extending or retracting: Move the
roof panel switch to the resistance
point in the required direction of
arrow 1, 2 or 3 until the roller sun-
blinds have reached their desired posi-
tion.
̈ Express-extending: Move the roof
panel switch past the resistance point
in direction of arrow 1 or 2 and re-
lease.
The roller sunblinds extends
completely.
̈ Stopping during Express-extending:
Move the roof panel switch in any di-
rection.
Warning! G
When extending/retracting the roller sun-
blinds, make sure no one is in danger of be-
ing injured by the closing procedure. The
extending/retracting of the roller sunblinds
can be immediately halted by releasing the
switch or, if the switch was pressed past the
resistance point and released, by pressing
the switch in any direction.