Filter
Top Products
122
Controls in detail
Power windows
̈ Express-opening: Press the switch 1
to 4 (
୴ page 120) past the resistance
point and release.
The corresponding window opens com-
pletely.
̈ Express-closing: Pull the switch 1
to 4 (
୴ page 120) past the resistance
point and release.
The corresponding window closes com-
pletely.
̈ Stopping during Express-operation:
Briefly press the respective power win-
dow switch again.
Warning! G
Driver’s door only:
If within 5 seconds you again press the
switch past the resistance point and re-
lease, the automatic reversal will not oper-
ate.
Warning! G
If a window is blocked while closing and re-
opens, it can be closed with greater force if
you pull the switch to the resistance point
within 2 seconds.
If the window is blocked again and reopens,
you can close it with deactivated anti-trap
protection by pulling the switch again to the
resistance point within 2 seconds.
When closing windows with the anti-trap
protection deactivated, make sure no one
can become trapped, as this could result in
serious or fatal injuries.
!
If the upward movement of the window is
blocked during the closing procedure, the win-
dow will stop and open slightly. Remove the ob-
struction, press the respective power window
switch again past the resistance point and re-
lease. If the window still does not close when
there is no obstruction, press and hold the re-
spective power window switch. The side window
will then close without the protection of the au-
tomatic reversal feature.
୴୴