Filter
Top Products
106
Controls in detail
Fastening the seat belts
1 Seat belt outlet
2 Latch plate
3 Release button
4 Buckle
̈ Pull the seat belt smoothly from the
seat belt outlet 1.
̈ Place the shoulder portion of the seat
belt across the top of your shoulder
and the lap portion across your hips.
̈ Push latch plate 2 into buckle 4 until
it clicks.
̈ If necessary, adjust the seat belt to the
correct height (
୴ page 107).
̈ If necessary, tighten the lap portion to
a snug fit by pulling shoulder portion
up.
̈ To release the seat belt, press release
button 3 and guide latch plate 2
back to seat belt outlet 1.
Proper use of seat belts
ț Do not twist the seat belt when fasten-
ing.
ț Adjust seat belt so that the shoulder
portion is located as close as possible
to the middle of the shoulder (it should
not touch the neck). Never pass the
shoulder portion of the seat belt under
your arm.
ț Position the lap belt as low as possible
on your hips (over hip joint) and not
across the abdomen.
ț Place the seat backrest in a nearly up-
right position.
ț Never use a seat belt for more than one
person at a time.
ț Do not fasten a seat belt around a per-
son and another object at the same
time. When using a seat belt to secure
infant restraints or toddler restraints or
children in booster seats, always follow
the child seat manufacturer’s instruc-
tions.
Warning! G
Read and observe the additional warning no-
tices printed in the “Safety and Security”
section.