Filter
Top Products
199
Controls in detail
Audio system
Storing stations manually with station
memory menu
̈ Tune in desired station.
Basic menu is shown in the audio
display.
̈ Press n when the main area is active.
or
̈ Select
Presets
.
The station memory display appears in the
audio display.
The dot R in front of a memory position
indicates that the currently tuned station is
stored there.
̈ Selecting a memory position:
Slide qmr or rotate ymz.
̈ Storing a station to a selected mem-
ory position: Press and hold n until a
brief signal tone sounds.
or
̈ Press and hold desired station
button 1 to R on keypad, until a
brief signal tone sounds.
The station is stored.
Autostore – automatic station memory
̈ Press b button on audio control
unit repeatedly until desired waveband
has been selected.
Basic menu is shown in the audio
display.
̈ Press n when the main area is active.
or
̈ Select
Presets
.
The station memory display appears in the
audio display.
̈ Slide qmr or rotate ymz to select
Au-
tostore
.
̈ Press n.
The audio system searches for receivable
stations. A corresponding message is dis-
played. The available stations are automat-
ically stored in memory. The first received
station will be automatically played.
̈ Canceling storage procedure:
Press n while the “Searching” mes-
sage is being displayed.
i
This function is not available for Weather
Band. The autostore function automatically as-
signs receivable stations to the memory, sorted
according to reception quality at the moment of
performing the autostore. The stations which
were stored in the station memory manually are
completely lost in this process. If less than ten
stations are found, the remaining entries are left
empty.