Filter
Top Products
204
Controls in detail
Audio system
Tuning in channels
You have the following selection options:
ț The channel skip function
ț The manual channel number entry
ț The channel list
ț The channel presets
Tuning in channels using channel search
function
̈ Slide omp or rotate ymz when the
main area in the basic menu is active.
Depending on the direction in which
the controller is being slid or rotated,
the system skips upward or downward
and stops at the next subscribed chan-
nel.
or
̈ Press button G or H on audio
control unit.
Depending on the pressed button, the
system searches upward or downward
and stops at the next receivable
channel.
Tuning in channels using manual chan-
nel number entry
̈ b Ǟ
Sat
Ǟ
Enter Channel
.
The menu for manual channel number
entry appears.
or
̈ Press button ó, on the keypad in
audio control unit briefly.
̈ Channel number entry with keypad:
Enter desired channel number with
buttons 1 to R, with the keypad
in audio control unit briefly.
Further operation depends on whether the
selected channel number is valid or if the
channel is included in your subscription.
̈ Exiting menu without making an
entry: Press button í in the center
console (
୴ page 184).
Channel number is valid and channel is
included in subscription: The audio sys-
tem tunes in the channel entered.
Channel number is invalid: The message
Invalid Channel
appears in the audio dis-
play.
̈ Press n to close the message in the
audio display.
i
Which channels are available depends on
which channels you have subscribed to and the
program category you have selected
(
୴ page 203). For tuning in channels you can
also use the buttons on the multifunction steer-
ing wheel (
୴ page 159).