Filter
Top Products
278
Controls in detail
Panorama roof with power tilt/sliding panel*
Roof panel switch
1 Push up to raise at the rear
2 Push back to open
3 Pull down to close
̈ Switch on the ignition.
̈ To open, close, raise, or lower the
tilt/sliding panel, move the roof panel
switch to resistance point in the re-
quired direction of arrows 1 to 3.
Release the roof panel switch when the
tilt/sliding panel has reached the de-
sired position.
̈ Express-opening: Move the roof panel
switch past the resistance point in di-
rection of arrow 1 and release.
The tilt/sliding panel opens
completely.
̈ Express-raising: Move the roof panel
switch past the resistance point in di-
rection of arrow 3 and release.
The tilt/sliding panel raises
completely.
̈ Stopping during Express-operation:
Move the roof panel switch in any di-
rection.
Synchronizing
The tilt/sliding panel and front roller sun-
blinds must be synchronized
ț after the tilt/sliding panel has been
closed manually
ț after a malfunction
ț if the panorama roof with power
tilt/sliding panel can only be opened
with a jerking motion
i
If the front roller sunblind is retracted while
being raised, it will extend first.
i
You cannot automatically close and lower
the panorama roof with power tilt/sliding panel.
୴୴