Filter
Top Products
250
Control systems
Instrument cluster control system
You can use the functions in the “Tele-
phone” menu to operate your telephone,
provided it is inserted in the cradle and
switched on.
Logging-on to a network
̈ Switch on the telephone and COMAND
(
୴ page 79).
̈ Press ( or & to select the “Tele-
phone” menu.
Which messages appear in the multifunc-
tion display field depends on whether your
telephone is switched on or off.
ț If the telephone is off, the message in
the multifunction display is: “Telephone
OFF”.
ț If the telephone is not inserted in the
cradle, the message in the multifunc-
tion display is: “No telephone inserted”.
ț If the PIN or unlock code is not yet en-
tered, the message in the multifunction
display is “Please enter PIN” or “Enter
unlock code”.
ț If the telephone is switched on, the
telephone will then search for a net-
work. During this time, the multifunc-
tion display is blank. If no network
available, the multifunction display
reads “No Service”.
ț If the telephone is on, as soon as the
telephone has found a network,
“Ready” or “Ready (Roaming)” appears
in the multifunction display.
Entering the PIN or unlock code
̈ Enter the PIN or unlock code using the
telephone keypad*, Voice Control* or
telephone*.
The telephone will then search for a
network.
You may carry out the following functions:
Dialing a number from the mobile
phone book
If your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
̈ Log on to the network (୴ page 250).
Warning! G
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle’s electronic system, pos-
sibly resulting in an accident and/or
personal injury.
Function Page
Dialing a number from the phone
book
250
Redialing 251
Answering a call 252
Ending a call or rejecting an in-
coming call
252