Filter
Top Products
245
Control systems
Instrument cluster control system
Trip menu
In the “Trip” menu, you can show an addi-
tional display for the speedometer and call
up or reset your vehicle’s statistical data.
Standard display
In the standard display, the trip odometer
and main odometer are shown in the mul-
tifunction display.
̈ Press ( or & to select the “Trip”
menu.
1 Main odometer
2 Trip odometer
Fuel consumption statistics after start
̈ Press ( or & to select the “Trip”
menu.
̈ Press % to select “After start”.
1 Distance driven since start
2 Time elapsed since start
3 Average speed since start
4 Average fuel consumption since start
Fuel consumption statistics since last
reset
̈ Press ( or & to select the “Trip”
menu.
̈ Press % or $ to select “After re-
set”.
1 Distance driven since last reset
2 Time elapsed since last reset
3 Average fuel consumption since last re-
set
4 Average speed since last reset
i
The menu overview can be found on
(
୴ page 243).
i
All values that are based on the last start are
reset when you turn off the vehicle’s engine for
more than four hours (
୴ page 365).
i
If you turn the SmartKey to position 1 or 2
again during this time, the values will not be re-
set. After 999 hours or 9999 miles (kilometers),
the fuel consumption statistics after start are au-
tomatically reset.
i
After 9999 hours or 99,999 miles (kilome-
ters), the fuel consumption statistics since last
reset are automatically reset.