Filter
Top Products
94
Safety and Security
Driving safety systems
When you switch off the ESP
®
ț the ESP
®
does not stabilize the vehicle
ț the engine output is not limited, which
allows the drive wheels to spin and
thus cut into surfaces for better grip
ț the traction control is not available
ț the ESP
®
operates while you are
braking
ț you cannot activate the cruise control
ț the cruise control switches off if
currently activated
The ESP
®
switch is located on the center
console.
1 ESP
®
switch
̈ With the engine running, press ESP
®
switch 1 until the ESP
®
warning
lamp v in the instrument cluster
comes on.
The ESP
®
is switched off.
Switching on the ESP
®
̈ Press ESP
®
switch 1 until the ESP
®
warning lamp v in the instrument
cluster goes out.
You are now again in normal driving
mode with ESP
®
switched on.
i
When the ESP
®
is switched off and one
or more drive wheels are spinning, the ESP
®
warning lamp v in the instrument cluster
flashes. However, the ESP
®
will then not
stabilize the vehicle.
Warning! G
When the ESP
®
warning lamp v is
illuminated continuously, the ESP
®
is
switched off or is not operational due to a
malfunction. Vehicle stability in standard
driving maneuvers reduces.
Adapt your speed and driving to the prevail-
ing road conditions and to the non-operating
status of the ESP
®
.
!
Avoid spinning of a drive wheel for an
extended period with the ESP
®
switched off. This
may cause serious damage to the drivetrain
which is not covered by the Mercedes-Benz
Limited Warranty.