Filter
Top Products
157
Controls in detail
Control system
̈ Press button æ or ç to select
the language to be used for the
multifunction display messages.
Available languages:
ț German
ț English
ț French
ț Italian
ț Spanish
ț Dutch
ț Danish
ț Swedish
ț Portuguese
ț Turkish
ț Russian (Canada only)
Selecting display (speed display or out-
side temperature) for the status line
̈ Move the selection marker with
button æ or ç to the
Instr. cluster
submenu.
̈ Press button j or k repeatedly
until the message
Status line dis-
play
appears in the multifunction
display.
The selection marker is on the current
setting.
̈ Press button æ or ç to select
the desired setting.
Selecting display (speed display or out-
side temperature) for standard display
̈ Move the selection marker with
button æ or ç to the
Instr. cluster
submenu.
̈ Press button j or k repeatedly
until the message
Basic display
appears in the multifunction display.
The selection marker is on the current
setting.
̈ Press button æ or ç to select
the display mode shown in the basic
display.
i
You will see the status line when you have
called up a different display from the standard
display.