Filter
Top Products
117
Controls in detail
Locking and unlocking
Valet locking
The lock is located next to the handle
above the rear license plate recess.
1 Neutral position
2 Locked
̈ Close the trunk (୴ page 110).
̈ Pull the mechanical key out of the
SmartKey (
୴ page 410).
̈ Insert the mechanical key in the trunk
lid lock.
̈ Turn the mechanical key clockwise to
position 2 and remove the mechani-
cal key in that position to lock the
trunk.
The trunk remains locked even when the
vehicle is centrally unlocked.
̈ Insert the mechanical key in the trunk
lid lock.
̈ Turn the mechanical key counterclock-
wise to neutral position 1 and remove
the mechanical key in that position to
unlock the trunk.
You can now open the trunk
(
୴ page 109).
Automatic central locking
The doors and the trunk automatically lock
when the ignition is switched on and the
wheels are turning at vehicle speeds of
approximately 9 mph (15 km/h) or more.
You can open a locked door from the
inside. Open door only when conditions
are safe to do so.
You can deactivate the automatic locking
mode using the control system, see “Set-
ting automatic locking” (
୴ page 164).
i
To deny any unauthorized person access to
the trunk, e.g. when you valet park the vehicle,
lock it separately with the mechanical key. Leave
only the SmartKey or SmartKey with
KEYLESS-GO* less its mechanical key with the
vehicle.
i
You can only cancel the separate trunk lock-
ing mode by means of the mechanical key.
i
The doors unlock automatically after an ac-
cident if the force of the impact exceeds a preset
threshold.
To prevent the vehicle door locks from locking,
deactivate the automatic central locking when
the vehicle
ț is pushed or towed
ț is on a test stand