Filter
Top Products
137
Controls in detail
Instrument cluster
Coolant temperature indicator
The coolant temperature indicator is on
the right side in the instrument cluster
(
୴ page 26).
Resetting trip odometer
̈ Make sure you are viewing the stan-
dard display in the multifunction dis-
play (
୴ page 145).
̈ If it is not displayed, press button è
or ÿ on the multifunction steering
wheel repeatedly until the standard dis-
play appears (
୴ page 140).
̈ Press and hold the reset button on the
instrument cluster (
୴ page 136) until
the trip odometer is reset.
Warning! G
ț Driving when your engine is overheated
can cause some fluids which may have
leaked into the engine compartment to
catch fire. You could be seriously
burned.
ț Steam from an overheated engine can
cause serious burns which can occur
just by opening the hood. Stay away
from the engine if you see or hear steam
coming from it.
Stop the vehicle in a safe location away from
other traffic. Turn off the engine, get out of
the vehicle and do not stand near the vehicle
until the engine has cooled down.
!
Excessive coolant temperature triggers a
warning in the multifunction display
(
୴ page 391) and the red coolant warning lamp
in the instrument cluster comes on
(
୴ page 371).
The engine should not be operated with the cool-
ant temperature above 248°F (120°C). Doing so
may cause serious engine damage which is not
covered by the Mercedes-Benz Limited
Warranty.
i
During severe operating conditions, e.g.
stop-and-go traffic, the coolant temperature may
rise close to 248°F (120°C).